警惕假冒网站，防止密码泄露! 近期发现部分网站几乎完全抄袭本站内容和版面
在此声明: 本站没有所谓的分站, 我们的网址是 www.applex.net
Dismiss Notice
Mac用户Telegram电报群
注意: 请在50秒内验证提问 https://t.me/mac_osx
Dismiss Notice

假冒网站提醒 Mac用户Telegram电报群@mac_osx

教程 iATKOS ML2安装U盘制作教程

Discussion in 'Hackintosh 黑苹果论坛' started by Bill, May 4, 2013.

Page 2 of 7

Tien3395 学前班

Joined:

Sep 22, 2013

Messages:

2

Sep 22, 2013 #11

Bill said: ↑

Instructions for the dmg image file:

- Before anything, check the md5 of the iATKOS_ML2.dmg file you downloaded.

The correct md5 of iATKOS_ML2.dmg >>> 2aa379fc63fa20ad95e046e14a8b30d4

If the md5 of your dmg file does not match the md5 above, then you have a faulty file.
In this situation anything including freezes, boot errors, any kind of error messages causing frustration of your soul is possible! Take my word.

OS X:
DVD/Blu-Ray: Burn the dmg image to a blank Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Disk Utility on OS X and then you are ready to boot with the disk and install OS X to your computer.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: Restore the dmg image to a USB HDD/Stick using OS X Disk Utility and install the chameleon bootloader to the USB target using this pkg file. Then you can boot with the USB device and install OS X to your computer.
Here is the video tutorial for restoring iATKOS ML2 to a USB device.

Windows:
DVD/Blu-Ray: Windows users can burn iATKOS ML2 dmg image file to a Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Transmac.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: For Windows, yet there is not an easy and safe way to prepare a bootable USB installer including Chameleon v2.2 r2140 bootloader which is the version used for iATKOS ML2. We'll keep here updated for the safe and easiest way to do it on winblows.

Linux:
- There are many ways to do it on Linux systems, we will determine the easiest way and keep this post updated..

cheers
Click to expand...

That's GooD!Good!Good!
wonderboy 学前班

Joined:

Sep 26, 2013

Messages:

3

Sep 26, 2013 #12

感谢楼主分享我需要那个PKG
fatfox2002cn 学前班

Joined:

Oct 19, 2013

Messages:

3

Oct 19, 2013 #13

这个是我需要的，下了试试看了
allenhue 学前班

Joined:

Oct 23, 2013

Messages:

1

Oct 23, 2013 #14

感謝大大分享
者边走那边走 学前班

Joined:

Nov 12, 2013

Messages:

2

Nov 12, 2013 #15

感謝大大分享
xdybi VIP会员

Joined:

Dec 22, 2013

Messages:

1

Dec 22, 2013 #16

谢谢楼主啦
manka 学前班

Joined:

Mar 2, 2014

Messages:

1

Mar 2, 2014 #17

Bill said: ↑

Instructions for the dmg image file:

- Before anything, check the md5 of the iATKOS_ML2.dmg file you downloaded.

The correct md5 of iATKOS_ML2.dmg >>> 2aa379fc63fa20ad95e046e14a8b30d4

If the md5 of your dmg file does not match the md5 above, then you have a faulty file.
In this situation anything including freezes, boot errors, any kind of error messages causing frustration of your soul is possible! Take my word.

OS X:
DVD/Blu-Ray: Burn the dmg image to a blank Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Disk Utility on OS X and then you are ready to boot with the disk and install OS X to your computer.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: Restore the dmg image to a USB HDD/Stick using OS X Disk Utility and install the chameleon bootloader to the USB target using this pkg file. Then you can boot with the USB device and install OS X to your computer.
Here is the video tutorial for restoring iATKOS ML2 to a USB device.

Windows:
DVD/Blu-Ray: Windows users can burn iATKOS ML2 dmg image file to a Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Transmac.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: For Windows, yet there is not an easy and safe way to prepare a bootable USB installer including Chameleon v2.2 r2140 bootloader which is the version used for iATKOS ML2. We'll keep here updated for the safe and easiest way to do it on winblows.

Linux:
- There are many ways to do it on Linux systems, we will determine the easiest way and keep this post updated..

cheers
Click to expand...

搂主辛苦,找了很久
zuojlin 学前班

Joined:

Mar 5, 2014

Messages:

2

Mar 5, 2014 #18

需要这个
从前有个小包子 学前班

Joined:

Jun 12, 2014

Messages:

2

Jun 12, 2014 #19

谢谢啦
dellcorsair123 学前班

Joined:

Jun 14, 2014

Messages:

1

Jun 14, 2014 #20

Bill said: ↑

Instructions for the dmg image file:

- Before anything, check the md5 of the iATKOS_ML2.dmg file you downloaded.

The correct md5 of iATKOS_ML2.dmg >>> 2aa379fc63fa20ad95e046e14a8b30d4

If the md5 of your dmg file does not match the md5 above, then you have a faulty file.
In this situation anything including freezes, boot errors, any kind of error messages causing frustration of your soul is possible! Take my word.

OS X:
DVD/Blu-Ray: Burn the dmg image to a blank Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Disk Utility on OS X and then you are ready to boot with the disk and install OS X to your computer.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: Restore the dmg image to a USB HDD/Stick using OS X Disk Utility and install the chameleon bootloader to the USB target using this pkg file. Then you can boot with the USB device and install OS X to your computer.
Here is the video tutorial for restoring iATKOS ML2 to a USB device.

Windows:
DVD/Blu-Ray: Windows users can burn iATKOS ML2 dmg image file to a Dual Layer DVD (±R, ±RW) or Blu-Ray Disk (BD-R, BD-RE) using Transmac.
Burn the disc at the minimum speed and verify the recording process, otherwise you may have a faulty disc of iATKOS ML2 which is as same as a faulty dmg image.

USB HDD/Flash Drive/Stick: For Windows, yet there is not an easy and safe way to prepare a bootable USB installer including Chameleon v2.2 r2140 bootloader which is the version used for iATKOS ML2. We'll keep here updated for the safe and easiest way to do it on winblows.

Linux:
- There are many ways to do it on Linux systems, we will determine the easiest way and keep this post updated..

cheers
Click to expand...

(You must log in or sign up to reply here.)

Page 2 of 7